This Request for Quotation seeks thirty-five SAS Actuator Assys (NSN: 1560-01-129-1256) with a requested delivery date of 10/01/2026. The solicitation is 100% set-aside for small businesses and requires parts traceability to OEMs or approved sources. [2]
Key points
RFQ for 35 SAS Actuator Assys, P/N 70410-02500-049 [2]
Small Business Set Aside; requires FAA-approved, new parts [2]
No drawings or specifications are available from the agency [1]
Sources
A00003+-+Attachment+1-+Terms+and+Conditions+-+70Z03826QJ0000289.pdfSee sections 1823 through 1825 and 1832 of Public Law 118-31 for statutory requirements pertaining to exemptions, exceptions, and waivers. (d) Prohibition on using or providing specific products or services or conducting certain transactions regardless of connection to contract. (1) Certain telecommunications and video surveillance equipment, systems, or services. (i) Unless an applicable waiver has been issued by the Government, the Contractor cannot use any equipment, systems, or services that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system (paragraph (a)(1)(B) of section 889 of the
Generated from the public notice and source-backed solicitation passages. Confirm important requirements in the cited brief and official documents.
Public-source intelligence
Source-backed opportunity brief
7 citations · 6 sources
See sections 1823 through 1825 and 1832 of Public Law 118-31 for statutory requirements pertaining to exemptions, exceptions, and waivers. (d) Prohibition on using or providing specific products or services or conducting certain transactions regardless of connection to contract. (1) Certain telecommunications and video surveillance equipment, systems, or services. (i) Unless an applicable waiver has been issued by the Government, the Contractor cannot use any equipment, systems, or services that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system (paragraph (a)(1)(B) of section 889 of the John S.
Attachment 1 - Terms and Conditions 70Z03826QJ0000289 Page 18 of 23 (iii) For indefinite delivery contracts, the Contractor shall report to both the contracting office for the indefinite delivery contract and the contracting office for any affected order. (3) If the report provided does not contain any of the information required by paragraph (h)(1) of this clause, and the contractor later discovers new information that is required by paragraph (h)(1) of this clause, then the contractor shall submit a subsequent report within 72 hours of discovering the new information. (4) The contractor shall also report the information in paragraph (h)(1) if the contractor wishes to ask for a waiver of the requirements of a new FASCSA order being applied through modification. (i) New FASCSA orders report. (1) During contract performance, the Contractor shall review SAM at least once every three months, or as advised by the Contracting Officer, to check for covered articles subject to FASCSA order(s), or for products or services produced by a source subject to FASCSA order(s) not currently identified under paragraph (e) of this clause. (2) If the Contractor identifies a new FASCSA order(s) that could impact their supply chain, then the Contractor shall conduct a reasonable inquiry to identify whether a covered article or product or service produced or provided by a source subject to the FASCSA order(s) was provided to the Government or used during contract performance.
For Federal Supply Schedules, Governmentwide acquisition contracts, multi-agency contracts or any other procurement instrument intended for use by multiple agencies, upon notification from the Contracting Officer, during the performance of the contract, the Contractor shall promptly make any necessary changes or modifications to remove any product or service produced or provided by a source that this clause prohibits. (h) General report.
Acceptance of the order in accordance with (IAW) FAR 12.201 constitutes acceptance of all terms and conditions contained herein. (a) Provisions 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services (Aug 2025) (DEVIATION 25-21) (effective November 28, 2025) 52.212-2 Evaluation—Commercial Products and Commercial Services (Aug 2025) (DEVIATION 25-21) (effective November 28, 2025) (a) Evaluation Factors.
The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer.
Extracted from the official notice and archived solicitation files. Confirm controlling requirements in the source documents.
Notice information
Read full notice text
A00003 - "Factor 1, Technical Acceptability Criteria" has been revised and an amended version of "Attachment 1 - Terms and Conditions - 70Z03826QJ0000286" has been attached to this contract opportunity. A00002 - The response date for this contract opportunity has been extended until September 8, 2026 at 2:00 PM EDT. A00001 - The response date for this contract opportunity has been extended until August 31, 2026 at 2:00 PM EDT. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.201, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. Solicitation number 70Z03826QJ0000289 is issued as a Request for Quotation (RFQ). This solicitation document and incorporated provisions and clauses are those in effect as of November 28, 2025, IAW the Revolutionary FAR Overhaul (RFO). The applicable North American Industry Classification Standard Code is 336413. The small business size standard is 1,250. This solicitation is 100% Set-Aside for Small Business. Offerors must be certified as a small business concern under the applicable NAICS code to be eligible for award. All responsible sources may submit a quotation which shall be considered by the agency. It is anticipated that a firm-fixed price purchase order will be awarded on a competitive basis as a result of this synopsis/solicitation for the following item: Nomenclature: SAS Actuator Assy National Stock Number (NSN): 1560-01-129-1256 Part Number (P/N): 70410-02500-049 Quantity: Thirty-five (35) each Requested Delivery Date: 10/01/2026 All parts shall have clear traceability to the Original Equipment Manufacturer (OEM), Sikorsky Aircraft Corporation (Cage Code 78286), Spectrum Associates Inc (Cage Code 4SQG0), or S & L Aerospace Metals LLC (Cage Code 05722). Traceability means a clear, complete, documented, and auditable paper trail which traces each step from an OEM to its current location. Concerns having the expertise and required capabilities to provide these items are invited to submit offers in accordance with the requirements stipulated in this solicitation. Parts must be approved in accordance with Federal Aviation Administration (FAA) guidelines to ensure safety of our aircrew. The Government shall ensure all procurements are awarded without jeopardizing quality or safety of flight. Only the use of airworthy commercial specifications or standard military specifications/military standard parts will be utilized and approved from this solicitation. Newly manufactured commercial items will only be procured from sources able to provide a certificate of airworthiness, FAA 8130 or equivalent European Aviation Safety Agency (EASA) Certification, or a certificate of conformance and traceability to the OEM. The contractor shall furnish a Certificate of Conformance (COC) in accordance with Federal Acquisition Regulation (FAR) clause 52.246-15. COC must be submitted in the format specified in the clause. Offerors must be able to provide necessary certification including traceability to the manufacturer, manufacturer's COC and its own certificate of conformance to ensure parts are in airworthy condition, suitable for installation on USCG aircraft. Prospective vendors who are not the OEM or must provide traceability for the offered product back to the manufacturer. All parts shall be NEW approved parts. "New Surplus" will be considered with approval from Medium Range Recovery (MRR) Engineering. If quoting "New Surplus" items, photos of packaging and/or items MUST be included with the quotation. NOTE: NO DRAWINGS, SPECIFICATIONS OR SCHEMATICS ARE AVAILABLE FROM THIS AGENCY. Please carefully review the following attachments for additional information and requirements: ATTACHMENT 1 - "TERMS AND CONDITIONS - 70Z03826QJ0000289" FOR APPLICABLE CLAUSES, INSTRUCTIONS AND EVALUATION CRITERIA. Closing date and time for receipt of offers is 9/8/2026 at 2:00 p.m. Eastern Daylight Time. Anticipated award date is on or about 9/10/2026. E-mail quotations may be sent to Austin.R.Ivins@uscg.mil and MRR-PROCUREMENT@uscg.mil. Please indicate 70Z03826QJ0000289 in the subject line.
What changed
Sep 1, 2026 · 1 field changed
DescriptionA00002 - The response date for this contract opportunity has been extended until September 8, 2026 at 2:00 PM EDT. A00001 - The response date for this contract opportunity has been extended until August 31, 2026 at 2:00 PM EDT. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.201, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. Solicitation number 70Z03826QJ0000289 is issued as a Request for Quotation (RFQ). This solicitation document and incorporated provisions and clauses are those in effect as of November 28, 2025, IAW the Revolutionary FAR Overhaul (RFO). The applicable North American Industry Classification Standard Code is 336413. The small business size standard is 1,250. This solicitation is 100% Set-Aside for Small Business. Offerors must be certified as a small business concern under the applicable NAICS code to be eligible for award. All responsible sources may submit a quotation which shall be considered by the agency. It is anticipated that a firm-fixed price purchase order will be awarded on a competitive basis as a result of this synopsis/solicitation for the following item: Nomenclature: SAS Actuator Assy National Stock Number (NSN): 1560-01-129-1256 Part Number (P/N): 70410-02500-049 Quantity: Thirty-five (35) each Requested Delivery Date: 10/01/2026 All parts shall have clear traceability to the Original Equipment Manufacturer (OEM), Sikorsky Aircraft Corporation (Cage Code 78286), Spectrum Associates Inc (Cage Code 4SQG0), or S & L Aerospace Metals LLC (Cage Code 05722). Traceability means a clear, complete, documented, and auditable paper trail which traces each step from an OEM to its current location. Concerns having the expertise and required capabilities to provide these items are invited to submit offers in accordance with the requirements stipulated in this solicitation. Parts must be approved in accordance with Federal Aviation Administration (FAA) guidelines to ensure safety of our aircrew. The Government shall ensure all procurements are awarded without jeopardizing quality or safety of flight. Only the use of airworthy commercial specifications or standard military specifications/military standard parts will be utilized and approved from this solicitation. Newly manufactured commercial items will only be procured from sources able to provide a certificate of airworthiness, FAA 8130 (preferred) or equivalent European Aviation Safety Agency (EASA) Certification, or a certificate of conformance and traceability to the OEM. The contractor shall furnish a Certificate of Conformance (COC) in accordance with Federal Acquisition Regulation (FAR) clause 52.246-15. COC must be submitted in the format specified in the clause. Offerors must be able to provide necessary certification including traceability to the manufacturer, manufacturer's COC and its own certificate of conformance to ensure parts are in airworthy condition, suitable for installation on USCG aircraft. Prospective vendors who are not the OEM or must provide traceability for the offered product back to the manufacturer. All parts shall be NEW approved parts. "New Surplus" will be considered with approval from Medium Range Recovery (MRR) Engineering. If quoting "New Surplus" items, photos of packaging and/or items MUST be included with the quotation. NOTE: NO DRAWINGS, SPECIFICATIONS OR SCHEMATICS ARE AVAILABLE FROM THIS AGENCY. Please carefully review the following attachments for additional information and requirements: ATTACHMENT 1 - "TERMS AND CONDITIONS - 70Z03826QJ0000289" FOR APPLICABLE CLAUSES, INSTRUCTIONS AND EVALUATION CRITERIA. Closing date and time for receipt of offers is 9/8/2026 at 2:00 p.m. Eastern Daylight Time. Anticipated award date is on or about 9/10/2026. E-mail quotations may be sent to Austin.R.Ivins@uscg.mil and MRR-PROCUREMENT@uscg.mil. Please indicate 70Z03826QJ0000289 in the subject line.A00003 - "Factor 1, Technical Acceptability Criteria" has been revised and an amended version of "Attachment 1 - Terms and Conditions - 70Z03826QJ0000286" has been attached to this contract opportunity. A00002 - The response date for this contract opportunity has been extended until September 8, 2026 at 2:00 PM EDT. A00001 - The response date for this contract opportunity has been extended until August 31, 2026 at 2:00 PM EDT. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.201, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. Solicitation number 70Z03826QJ0000289 is issued as a Request for Quotation (RFQ). This solicitation document and incorporated provisions and clauses are those in effect as of November 28, 2025, IAW the Revolutionary FAR Overhaul (RFO). The applicable North American Industry Classification Standard Code is 336413. The small business size standard is 1,250. This solicitation is 100% Set-Aside for Small Business. Offerors must be certified as a small business concern under the applicable NAICS code to be eligible for award. All responsible sources may submit a quotation which shall be considered by the agency. It is anticipated that a firm-fixed price purchase order will be awarded on a competitive basis as a result of this synopsis/solicitation for the following item: Nomenclature: SAS Actuator Assy National Stock Number (NSN): 1560-01-129-1256 Part Number (P/N): 70410-02500-049 Quantity: Thirty-five (35) each Requested Delivery Date: 10/01/2026 All parts shall have clear traceability to the Original Equipment Manufacturer (OEM), Sikorsky Aircraft Corporation (Cage Code 78286), Spectrum Associates Inc (Cage Code 4SQG0), or S & L Aerospace Metals LLC (Cage Code 05722). Traceability means a clear, complete, documented, and auditable paper trail which traces each step from an OEM to its current location. Concerns having the expertise and required capabilities to provide these items are invited to submit offers in accordance with the requirements stipulated in this solicitation. Parts must be approved in accordance with Federal Aviation Administration (FAA) guidelines to ensure safety of our aircrew. The Government shall ensure all procurements are awarded without jeopardizing quality or safety of flight. Only the use of airworthy commercial specifications or standard military specifications/military standard parts will be utilized and approved from this solicitation. Newly manufactured commercial items will only be procured from sources able to provide a certificate of airworthiness, FAA 8130 or equivalent European Aviation Safety Agency (EASA) Certification, or a certificate of conformance and traceability to the OEM. The contractor shall furnish a Certificate of Conformance (COC) in accordance with Federal Acquisition Regulation (FAR) clause 52.246-15. COC must be submitted in the format specified in the clause. Offerors must be able to provide necessary certification including traceability to the manufacturer, manufacturer's COC and its own certificate of conformance to ensure parts are in airworthy condition, suitable for installation on USCG aircraft. Prospective vendors who are not the OEM or must provide traceability for the offered product back to the manufacturer. All parts shall be NEW approved parts. "New Surplus" will be considered with approval from Medium Range Recovery (MRR) Engineering. If quoting "New Surplus" items, photos of packaging and/or items MUST be included with the quotation. NOTE: NO DRAWINGS, SPECIFICATIONS OR SCHEMATICS ARE AVAILABLE FROM THIS AGENCY. Please carefully review the following attachments for additional information and requirements: ATTACHMENT 1 - "TERMS AND CONDITIONS - 70Z03826QJ0000289" FOR APPLICABLE CLAUSES, INSTRUCTIONS AND EVALUATION CRITERIA. Closing date and time for receipt of offers is 9/8/2026 at 2:00 p.m. Eastern Daylight Time. Anticipated award date is on or about 9/10/2026. E-mail quotations may be sent to Austin.R.Ivins@uscg.mil and MRR-PROCUREMENT@uscg.mil. Please indicate 70Z03826QJ0000289 in the subject line.
Aug 31, 2026 · 3 fields changed
Response deadline2026-08-31T18:00:00+00:002026-09-08T18:00:00+00:00Archive date2026-09-152026-09-23DescriptionA00001 - The response date for this contract opportunity has been extended until August 31, 2026 at 2:00 PM EDT. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.201, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. Solicitation number 70Z03826QJ0000289 is issued as a Request for Quotation (RFQ). This solicitation document and incorporated provisions and clauses are those in effect as of November 28, 2025, IAW the Revolutionary FAR Overhaul (RFO). The applicable North American Industry Classification Standard Code is 336413. The small business size standard is 1,250. This solicitation is 100% Set-Aside for Small Business. Offerors must be certified as a small business concern under the applicable NAICS code to be eligible for award. All responsible sources may submit a quotation which shall be considered by the agency. It is anticipated that a firm-fixed price purchase order will be awarded on a competitive basis as a result of this synopsis/solicitation for the following item: Nomenclature: SAS Actuator Assy National Stock Number (NSN): 1560-01-129-1256 Part Number (P/N): 70410-02500-049 Quantity: Thirty-five (35) each Requested Delivery Date: 10/01/2026 All parts shall have clear traceability to the Original Equipment Manufacturer (OEM), Sikorsky Aircraft Corporation (Cage Code 78286), Spectrum Associates Inc (Cage Code 4SQG0), or S & L Aerospace Metals LLC (Cage Code 05722). Traceability means a clear, complete, documented, and auditable paper trail which traces each step from an OEM to its current location. Concerns having the expertise and required capabilities to provide these items are invited to submit offers in accordance with the requirements stipulated in this solicitation. Parts must be approved in accordance with Federal Aviation Administration (FAA) guidelines to ensure safety of our aircrew. The Government shall ensure all procurements are awarded without jeopardizing quality or safety of flight. Only the use of airworthy commercial specifications or standard military specifications/military standard parts will be utilized and approved from this solicitation. Newly manufactured commercial items will only be procured from sources able to provide a certificate of airworthiness, FAA 8130 (preferred) or equivalent European Aviation Safety Agency (EASA) Certification, or a certificate of conformance and traceability to the OEM. The contractor shall furnish a Certificate of Conformance (COC) in accordance with Federal Acquisition Regulation (FAR) clause 52.246-15. COC must be submitted in the format specified in the clause. Offerors must be able to provide necessary certification including traceability to the manufacturer, manufacturer's COC and its own certificate of conformance to ensure parts are in airworthy condition, suitable for installation on USCG aircraft. Prospective vendors who are not the OEM or must provide traceability for the offered product back to the manufacturer. All parts shall be NEW approved parts. "New Surplus" will be considered with approval from Medium Range Recovery (MRR) Engineering. If quoting "New Surplus" items, photos of packaging and/or items MUST be included with the quotation. NOTE: NO DRAWINGS, SPECIFICATIONS OR SCHEMATICS ARE AVAILABLE FROM THIS AGENCY. Please carefully review the following attachments for additional information and requirements: ATTACHMENT 1 - "TERMS AND CONDITIONS - 70Z03826QJ0000289" FOR APPLICABLE CLAUSES, INSTRUCTIONS AND EVALUATION CRITERIA. Closing date and time for receipt of offers is 8/31/2026 at 2:00 p.m. Eastern Daylight Time. Anticipated award date is on or about 9/6/2026. E-mail quotations may be sent to Austin.R.Ivins@uscg.mil and MRR-PROCUREMENT@uscg.mil. Please indicate 70Z03826QJ0000289 in the subject line.A00002 - The response date for this contract opportunity has been extended until September 8, 2026 at 2:00 PM EDT. A00001 - The response date for this contract opportunity has been extended until August 31, 2026 at 2:00 PM EDT. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.201, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. Solicitation number 70Z03826QJ0000289 is issued as a Request for Quotation (RFQ). This solicitation document and incorporated provisions and clauses are those in effect as of November 28, 2025, IAW the Revolutionary FAR Overhaul (RFO). The applicable North American Industry Classification Standard Code is 336413. The small business size standard is 1,250. This solicitation is 100% Set-Aside for Small Business. Offerors must be certified as a small business concern under the applicable NAICS code to be eligible for award. All responsible sources may submit a quotation which shall be considered by the agency. It is anticipated that a firm-fixed price purchase order will be awarded on a competitive basis as a result of this synopsis/solicitation for the following item: Nomenclature: SAS Actuator Assy National Stock Number (NSN): 1560-01-129-1256 Part Number (P/N): 70410-02500-049 Quantity: Thirty-five (35) each Requested Delivery Date: 10/01/2026 All parts shall have clear traceability to the Original Equipment Manufacturer (OEM), Sikorsky Aircraft Corporation (Cage Code 78286), Spectrum Associates Inc (Cage Code 4SQG0), or S & L Aerospace Metals LLC (Cage Code 05722). Traceability means a clear, complete, documented, and auditable paper trail which traces each step from an OEM to its current location. Concerns having the expertise and required capabilities to provide these items are invited to submit offers in accordance with the requirements stipulated in this solicitation. Parts must be approved in accordance with Federal Aviation Administration (FAA) guidelines to ensure safety of our aircrew. The Government shall ensure all procurements are awarded without jeopardizing quality or safety of flight. Only the use of airworthy commercial specifications or standard military specifications/military standard parts will be utilized and approved from this solicitation. Newly manufactured commercial items will only be procured from sources able to provide a certificate of airworthiness, FAA 8130 (preferred) or equivalent European Aviation Safety Agency (EASA) Certification, or a certificate of conformance and traceability to the OEM. The contractor shall furnish a Certificate of Conformance (COC) in accordance with Federal Acquisition Regulation (FAR) clause 52.246-15. COC must be submitted in the format specified in the clause. Offerors must be able to provide necessary certification including traceability to the manufacturer, manufacturer's COC and its own certificate of conformance to ensure parts are in airworthy condition, suitable for installation on USCG aircraft. Prospective vendors who are not the OEM or must provide traceability for the offered product back to the manufacturer. All parts shall be NEW approved parts. "New Surplus" will be considered with approval from Medium Range Recovery (MRR) Engineering. If quoting "New Surplus" items, photos of packaging and/or items MUST be included with the quotation. NOTE: NO DRAWINGS, SPECIFICATIONS OR SCHEMATICS ARE AVAILABLE FROM THIS AGENCY. Please carefully review the following attachments for additional information and requirements: ATTACHMENT 1 - "TERMS AND CONDITIONS - 70Z03826QJ0000289" FOR APPLICABLE CLAUSES, INSTRUCTIONS AND EVALUATION CRITERIA. Closing date and time for receipt of offers is 9/8/2026 at 2:00 p.m. Eastern Daylight Time. Anticipated award date is on or about 9/10/2026. E-mail quotations may be sent to Austin.R.Ivins@uscg.mil and MRR-PROCUREMENT@uscg.mil. Please indicate 70Z03826QJ0000289 in the subject line.
Aug 21, 2026 · 3 fields changed
Response deadline2026-08-21T18:00:00+00:002026-08-31T18:00:00+00:00Archive date2026-09-052026-09-15DescriptionThis is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.201, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. Solicitation number 70Z03826QJ0000289 is issued as a Request for Quotation (RFQ). This solicitation document and incorporated provisions and clauses are those in effect as of November 28, 2025, IAW the Revolutionary FAR Overhaul (RFO). The applicable North American Industry Classification Standard Code is 336413. The small business size standard is 1,250. This solicitation is 100% Set-Aside for Small Business. Offerors must be certified as a small business concern under the applicable NAICS code to be eligible for award. All responsible sources may submit a quotation which shall be considered by the agency. It is anticipated that a firm-fixed price purchase order will be awarded on a competitive basis as a result of this synopsis/solicitation for the following item: Nomenclature: SAS Actuator Assy National Stock Number (NSN): 1560-01-129-1256 Part Number (P/N): 70410-02500-049 Quantity: Thirty-five (35) each Requested Delivery Date: 10/01/2026 All parts shall have clear traceability to the Original Equipment Manufacturer (OEM), Sikorsky Aircraft Corporation (Cage Code 78286), Spectrum Associates Inc (Cage Code 4SQG0), or S & L Aerospace Metals LLC (Cage Code 05722). Traceability means a clear, complete, documented, and auditable paper trail which traces each step from an OEM to its current location. Concerns having the expertise and required capabilities to provide these items are invited to submit offers in accordance with the requirements stipulated in this solicitation. Parts must be approved in accordance with Federal Aviation Administration (FAA) guidelines to ensure safety of our aircrew. The Government shall ensure all procurements are awarded without jeopardizing quality or safety of flight. Only the use of airworthy commercial specifications or standard military specifications/military standard parts will be utilized and approved from this solicitation. Newly manufactured commercial items will only be procured from sources able to provide a certificate of airworthiness, FAA 8130 (preferred) or equivalent European Aviation Safety Agency (EASA) Certification, or a certificate of conformance and traceability to the OEM. The contractor shall furnish a Certificate of Conformance (COC) in accordance with Federal Acquisition Regulation (FAR) clause 52.246-15. COC must be submitted in the format specified in the clause. Offerors must be able to provide necessary certification including traceability to the manufacturer, manufacturer's COC and its own certificate of conformance to ensure parts are in airworthy condition, suitable for installation on USCG aircraft. Prospective vendors who are not the OEM or must provide traceability for the offered product back to the manufacturer. All parts shall be NEW approved parts. "New Surplus" will be considered with approval from Medium Range Recovery (MRR) Engineering. If quoting "New Surplus" items, photos of packaging and/or items MUST be included with the quotation. NOTE: NO DRAWINGS, SPECIFICATIONS OR SCHEMATICS ARE AVAILABLE FROM THIS AGENCY. Please carefully review the following attachments for additional information and requirements: ATTACHMENT 1 - "TERMS AND CONDITIONS - 70Z03826QJ0000289" FOR APPLICABLE CLAUSES, INSTRUCTIONS AND EVALUATION CRITERIA. Closing date and time for receipt of offers is 8/21/2026 at 2:00 p.m. Eastern Daylight Time. Anticipated award date is on or about 8/25/2026. E-mail quotations may be sent to Austin.R.Ivins@uscg.mil and MRR-PROCUREMENT@uscg.mil. Please indicate 70Z03826QJ0000289 in the subject line.A00001 - The response date for this contract opportunity has been extended until August 31, 2026 at 2:00 PM EDT. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.201, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. Solicitation number 70Z03826QJ0000289 is issued as a Request for Quotation (RFQ). This solicitation document and incorporated provisions and clauses are those in effect as of November 28, 2025, IAW the Revolutionary FAR Overhaul (RFO). The applicable North American Industry Classification Standard Code is 336413. The small business size standard is 1,250. This solicitation is 100% Set-Aside for Small Business. Offerors must be certified as a small business concern under the applicable NAICS code to be eligible for award. All responsible sources may submit a quotation which shall be considered by the agency. It is anticipated that a firm-fixed price purchase order will be awarded on a competitive basis as a result of this synopsis/solicitation for the following item: Nomenclature: SAS Actuator Assy National Stock Number (NSN): 1560-01-129-1256 Part Number (P/N): 70410-02500-049 Quantity: Thirty-five (35) each Requested Delivery Date: 10/01/2026 All parts shall have clear traceability to the Original Equipment Manufacturer (OEM), Sikorsky Aircraft Corporation (Cage Code 78286), Spectrum Associates Inc (Cage Code 4SQG0), or S & L Aerospace Metals LLC (Cage Code 05722). Traceability means a clear, complete, documented, and auditable paper trail which traces each step from an OEM to its current location. Concerns having the expertise and required capabilities to provide these items are invited to submit offers in accordance with the requirements stipulated in this solicitation. Parts must be approved in accordance with Federal Aviation Administration (FAA) guidelines to ensure safety of our aircrew. The Government shall ensure all procurements are awarded without jeopardizing quality or safety of flight. Only the use of airworthy commercial specifications or standard military specifications/military standard parts will be utilized and approved from this solicitation. Newly manufactured commercial items will only be procured from sources able to provide a certificate of airworthiness, FAA 8130 (preferred) or equivalent European Aviation Safety Agency (EASA) Certification, or a certificate of conformance and traceability to the OEM. The contractor shall furnish a Certificate of Conformance (COC) in accordance with Federal Acquisition Regulation (FAR) clause 52.246-15. COC must be submitted in the format specified in the clause. Offerors must be able to provide necessary certification including traceability to the manufacturer, manufacturer's COC and its own certificate of conformance to ensure parts are in airworthy condition, suitable for installation on USCG aircraft. Prospective vendors who are not the OEM or must provide traceability for the offered product back to the manufacturer. All parts shall be NEW approved parts. "New Surplus" will be considered with approval from Medium Range Recovery (MRR) Engineering. If quoting "New Surplus" items, photos of packaging and/or items MUST be included with the quotation. NOTE: NO DRAWINGS, SPECIFICATIONS OR SCHEMATICS ARE AVAILABLE FROM THIS AGENCY. Please carefully review the following attachments for additional information and requirements: ATTACHMENT 1 - "TERMS AND CONDITIONS - 70Z03826QJ0000289" FOR APPLICABLE CLAUSES, INSTRUCTIONS AND EVALUATION CRITERIA. Closing date and time for receipt of offers is 8/31/2026 at 2:00 p.m. Eastern Daylight Time. Anticipated award date is on or about 9/6/2026. E-mail quotations may be sent to Austin.R.Ivins@uscg.mil and MRR-PROCUREMENT@uscg.mil. Please indicate 70Z03826QJ0000289 in the subject line.