The Department of Defense seeks a Firm-Fixed-Price contract for maintenance, repair, and preservation of a 65 FT Bravo Dive Boat 65DS1101 at the contractor's facility in the Puget Sound, WA region. The expected period of performance is from March 25, 2026, to May 29, 2026. [1]
Key points
Small Business Set Aside - Total for this procurement. [3]
Work must be performed at the Contractor's facility in Puget Sound, WA. [3]
Watch items
Offerors must submit an internal Government Property Management System Plan. [2]
The offeror must provide a narrative describing how they meet evaluation factor 3. [1]
Sources
C8+N4523A26Q1110+65DS1101+Solicitation.pdfN4523A26Q1110 Page 57 of 59 The offeror shall provide a narrative that describes how they meet the requirements of evaluation factor 3.
C8+N4523A26Q1110+65DS1101+Solicitation.pdfIn accordance with FAR subpart 45.201, the offeror shall, contained within their response to this request for (quote/proposal), submit a copy of their internal Government Property Management System Plan to be used in managing Government Property in accordance with FAR 52.245-1.
Generated from the public notice and source-backed solicitation passages. Confirm important requirements in the cited brief and official documents.
Public-source intelligence
Source-backed opportunity brief
8 citations · 6 sources
The Offeror's attention is directed to the "Organizational Conflict of Interest" (OCI) or similar requirement which may be contained in current or completed contract(s) which prohibits the prime or subcontractor from providing certain supplies or services to the Government as described above during the period of the current "support" contract(s) or for a period after completion of the "support" contract(s).
The determination as to which materials are scrap and which materials are salvage, will be made, or concurred in, by the duly appointed Property Administrator for the cognizant SUPSHIP or RMC Office. (b) As consideration for retaining the Government's scrap, the Contractor's price for the performance of the work required herein shall be a net price reflecting the value of the Government scrap. (c) This requirement is not intended to conflict in any way with the clause of this contract entitled "Performance" (DFARS 252.217-7010) or any Government Property clause, nor does it relieve the Contractor of any other requirement under such clauses. (End of Text) C-211-H010 TUG AND PILOT SERVICES (NAVSEA) (OCT 2018) (Oct 2018) The Contractor shall provide necessary tug and pilot services to move the vessel(s) from the fairway of the plant to the pier or dock, and upon completion of all work from the pier or dock, to the fairway of the plant. (End of Text) E-246-W007 NOTIFICATION OF INSPECTION OR TEST (NAVSEA) (OCT 2018) (Oct 2018) The Contractor agrees to notify arrange such a visit.
In accordance with FAR subpart 45.201, the offeror shall, contained within their response to this request for (quote/proposal), submit a copy of their internal Government Property Management System Plan to be used in managing Government Property in accordance with FAR 52.245-1.
Extracted from the official notice and archived solicitation files. Confirm controlling requirements in the source documents.
Notice information
Read full notice text
AMENDMENT 0005 POSTED 12/5. RFC #16 Response available in Attachments. AMENDMENT 0004 POSTED 12/3. AMENDMENT 0003 POSTED 11/26. AMENDMENT 0002 POSTED 11/21. AMENDMENT 0001 POSTED 11/19. The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) intends to award a stand-alone Firm-Fixed-Price contract to accomplish the maintenance, repair, and preservation in support of one (1) 65 FT BRAVO DIVE BOAT 65DS1101. Work will be accomplished at the Contractor's facility. Geographical Area of consideration: To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. 65DS1101 Length: 69 FT 10 IN Width: 22 FT 0 IN Draft: 3 FT 6 IN Full Displacement: 55 L TONS Age: 13 YEARS Light Load: 8,000 lbs Hull Type: Aluminum Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer's Representative (COR) to deliver the vessel to the Contractor's facility from Puget Sound Naval Shipyard (PSNS) Bremerton, WA. Remove all fendering and sweep blast clean. Accomplish survey of hull to identify and repair corrosion, preserve the exterior above and below the waterline, including the crane. Apply nonskid to horizontal surfaces on the exterior and interior of the boat. Replace motor mounts. Remove, inspect and install shafting, rudders and propellers. HVAC repair. Maintain and repair watertight hatches and doors. Repair, modify and preserve push knee. Replace and modify corroded deck and bulkhead structure in the main cabin. Install remote fuel shut offs. Identify and repair corrosion beneath the transformers in the aft lazzarette, install a weather shield above the starboard transformer in the aft lazzarette. Replace hydraulic, and fuel hoses. Identify and repair corroded structure beneath the shower room drain. Remove windows, repair window heaters, and reinstall windows. Replace fire suppression system piping and recertify system. Repair damage to the port bow. Accomplish modification and repair of swim platform stairs. Restore preservation system on the console in the pilot house. Replace existing generators with supplied Kohler generators, Modify, repair and install fendering system. Modify and repair the monkey heater system. Remove, inspect, preserve and install rudders. Replace thru hull valves and flexible hoses. Replace false bulkheads in the shower room and head. Open, clean and inspect all tanks. Perform sea trials after completion of repairs and full cure time of preservation. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. The Period of Performance is expected to be 25 March 2026 to 29 May 2026. This is a 100% Small Business set-aside under the North American Industry Classification System (NAICS) 336611, size standard 1,300 employees. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. NOTE 1: Please pay particular attention to the inclusion of DFARS 252.232-7998 Obligations in Advance of Fiscal Year 2026 Funding (DEVIATION 2026-O0001). NOTE 2: Please review Request for Quote instructions regarding contract financing.
What changed
Dec 15, 2025 · 1 field changed
Documents2223
Dec 5, 2025 · 4 fields changed
Response deadline2026-12-09T22:00:00+00:002026-12-16T22:00:00+00:00Archive date2026-12-242026-12-31DescriptionRFC #16 Response available in Attachments. AMENDMENT 0004 POSTED 12/3. AMENDMENT 0003 POSTED 11/26. AMENDMENT 0002 POSTED 11/21. AMENDMENT 0001 POSTED 11/19. The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) intends to award a stand-alone Firm-Fixed-Price contract to accomplish the maintenance, repair, and preservation in support of one (1) 65 FT BRAVO DIVE BOAT 65DS1101. Work will be accomplished at the Contractor's facility. Geographical Area of consideration: To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. 65DS1101 Length: 69 FT 10 IN Width: 22 FT 0 IN Draft: 3 FT 6 IN Full Displacement: 55 L TONS Age: 13 YEARS Light Load: 8,000 lbs Hull Type: Aluminum Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer's Representative (COR) to deliver the vessel to the Contractor's facility from Puget Sound Naval Shipyard (PSNS) Bremerton, WA. Remove all fendering and sweep blast clean. Accomplish survey of hull to identify and repair corrosion, preserve the exterior above and below the waterline, including the crane. Apply nonskid to horizontal surfaces on the exterior and interior of the boat. Replace motor mounts. Remove, inspect and install shafting, rudders and propellers. HVAC repair. Maintain and repair watertight hatches and doors. Repair, modify and preserve push knee. Replace and modify corroded deck and bulkhead structure in the main cabin. Install remote fuel shut offs. Identify and repair corrosion beneath the transformers in the aft lazzarette, install a weather shield above the starboard transformer in the aft lazzarette. Replace hydraulic, and fuel hoses. Identify and repair corroded structure beneath the shower room drain. Remove windows, repair window heaters, and reinstall windows. Replace fire suppression system piping and recertify system. Repair damage to the port bow. Accomplish modification and repair of swim platform stairs. Restore preservation system on the console in the pilot house. Replace existing generators with supplied Kohler generators, Modify, repair and install fendering system. Modify and repair the monkey heater system. Remove, inspect, preserve and install rudders. Replace thru hull valves and flexible hoses. Replace false bulkheads in the shower room and head. Open, clean and inspect all tanks. Perform sea trials after completion of repairs and full cure time of preservation. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. The Period of Performance is expected to be 25 March 2026 to 29 May 2026. This is a 100% Small Business set-aside under the North American Industry Classification System (NAICS) 336611, size standard 1,300 employees. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. NOTE 1: Please pay particular attention to the inclusion of DFARS 252.232-7998 Obligations in Advance of Fiscal Year 2026 Funding (DEVIATION 2026-O0001). NOTE 2: Please review Request for Quote instructions regarding contract financing.AMENDMENT 0005 POSTED 12/5. RFC #16 Response available in Attachments. AMENDMENT 0004 POSTED 12/3. AMENDMENT 0003 POSTED 11/26. AMENDMENT 0002 POSTED 11/21. AMENDMENT 0001 POSTED 11/19. The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) intends to award a stand-alone Firm-Fixed-Price contract to accomplish the maintenance, repair, and preservation in support of one (1) 65 FT BRAVO DIVE BOAT 65DS1101. Work will be accomplished at the Contractor's facility. Geographical Area of consideration: To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. 65DS1101 Length: 69 FT 10 IN Width: 22 FT 0 IN Draft: 3 FT 6 IN Full Displacement: 55 L TONS Age: 13 YEARS Light Load: 8,000 lbs Hull Type: Aluminum Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer's Representative (COR) to deliver the vessel to the Contractor's facility from Puget Sound Naval Shipyard (PSNS) Bremerton, WA. Remove all fendering and sweep blast clean. Accomplish survey of hull to identify and repair corrosion, preserve the exterior above and below the waterline, including the crane. Apply nonskid to horizontal surfaces on the exterior and interior of the boat. Replace motor mounts. Remove, inspect and install shafting, rudders and propellers. HVAC repair. Maintain and repair watertight hatches and doors. Repair, modify and preserve push knee. Replace and modify corroded deck and bulkhead structure in the main cabin. Install remote fuel shut offs. Identify and repair corrosion beneath the transformers in the aft lazzarette, install a weather shield above the starboard transformer in the aft lazzarette. Replace hydraulic, and fuel hoses. Identify and repair corroded structure beneath the shower room drain. Remove windows, repair window heaters, and reinstall windows. Replace fire suppression system piping and recertify system. Repair damage to the port bow. Accomplish modification and repair of swim platform stairs. Restore preservation system on the console in the pilot house. Replace existing generators with supplied Kohler generators, Modify, repair and install fendering system. Modify and repair the monkey heater system. Remove, inspect, preserve and install rudders. Replace thru hull valves and flexible hoses. Replace false bulkheads in the shower room and head. Open, clean and inspect all tanks. Perform sea trials after completion of repairs and full cure time of preservation. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. The Period of Performance is expected to be 25 March 2026 to 29 May 2026. This is a 100% Small Business set-aside under the North American Industry Classification System (NAICS) 336611, size standard 1,300 employees. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. NOTE 1: Please pay particular attention to the inclusion of DFARS 252.232-7998 Obligations in Advance of Fiscal Year 2026 Funding (DEVIATION 2026-O0001). NOTE 2: Please review Request for Quote instructions regarding contract financing.Documents2122
Dec 4, 2025 · 2 fields changed
DescriptionAMENDMENT 0004 POSTED 12/3. AMENDMENT 0003 POSTED 11/26. AMENDMENT 0002 POSTED 11/21. AMENDMENT 0001 POSTED 11/19. The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) intends to award a stand-alone Firm-Fixed-Price contract to accomplish the maintenance, repair, and preservation in support of one (1) 65 FT BRAVO DIVE BOAT 65DS1101. Work will be accomplished at the Contractor's facility. Geographical Area of consideration: To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. 65DS1101 Length: 69 FT 10 IN Width: 22 FT 0 IN Draft: 3 FT 6 IN Full Displacement: 55 L TONS Age: 13 YEARS Light Load: 8,000 lbs Hull Type: Aluminum Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer's Representative (COR) to deliver the vessel to the Contractor's facility from Puget Sound Naval Shipyard (PSNS) Bremerton, WA. Remove all fendering and sweep blast clean. Accomplish survey of hull to identify and repair corrosion, preserve the exterior above and below the waterline, including the crane. Apply nonskid to horizontal surfaces on the exterior and interior of the boat. Replace motor mounts. Remove, inspect and install shafting, rudders and propellers. HVAC repair. Maintain and repair watertight hatches and doors. Repair, modify and preserve push knee. Replace and modify corroded deck and bulkhead structure in the main cabin. Install remote fuel shut offs. Identify and repair corrosion beneath the transformers in the aft lazzarette, install a weather shield above the starboard transformer in the aft lazzarette. Replace hydraulic, and fuel hoses. Identify and repair corroded structure beneath the shower room drain. Remove windows, repair window heaters, and reinstall windows. Replace fire suppression system piping and recertify system. Repair damage to the port bow. Accomplish modification and repair of swim platform stairs. Restore preservation system on the console in the pilot house. Replace existing generators with supplied Kohler generators, Modify, repair and install fendering system. Modify and repair the monkey heater system. Remove, inspect, preserve and install rudders. Replace thru hull valves and flexible hoses. Replace false bulkheads in the shower room and head. Open, clean and inspect all tanks. Perform sea trials after completion of repairs and full cure time of preservation. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. The Period of Performance is expected to be 25 March 2026 to 29 May 2026. This is a 100% Small Business set-aside under the North American Industry Classification System (NAICS) 336611, size standard 1,300 employees. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. NOTE 1: Please pay particular attention to the inclusion of DFARS 252.232-7998 Obligations in Advance of Fiscal Year 2026 Funding (DEVIATION 2026-O0001). NOTE 2: Please review Request for Quote instructions regarding contract financing.RFC #16 Response available in Attachments. AMENDMENT 0004 POSTED 12/3. AMENDMENT 0003 POSTED 11/26. AMENDMENT 0002 POSTED 11/21. AMENDMENT 0001 POSTED 11/19. The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) intends to award a stand-alone Firm-Fixed-Price contract to accomplish the maintenance, repair, and preservation in support of one (1) 65 FT BRAVO DIVE BOAT 65DS1101. Work will be accomplished at the Contractor's facility. Geographical Area of consideration: To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. 65DS1101 Length: 69 FT 10 IN Width: 22 FT 0 IN Draft: 3 FT 6 IN Full Displacement: 55 L TONS Age: 13 YEARS Light Load: 8,000 lbs Hull Type: Aluminum Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer's Representative (COR) to deliver the vessel to the Contractor's facility from Puget Sound Naval Shipyard (PSNS) Bremerton, WA. Remove all fendering and sweep blast clean. Accomplish survey of hull to identify and repair corrosion, preserve the exterior above and below the waterline, including the crane. Apply nonskid to horizontal surfaces on the exterior and interior of the boat. Replace motor mounts. Remove, inspect and install shafting, rudders and propellers. HVAC repair. Maintain and repair watertight hatches and doors. Repair, modify and preserve push knee. Replace and modify corroded deck and bulkhead structure in the main cabin. Install remote fuel shut offs. Identify and repair corrosion beneath the transformers in the aft lazzarette, install a weather shield above the starboard transformer in the aft lazzarette. Replace hydraulic, and fuel hoses. Identify and repair corroded structure beneath the shower room drain. Remove windows, repair window heaters, and reinstall windows. Replace fire suppression system piping and recertify system. Repair damage to the port bow. Accomplish modification and repair of swim platform stairs. Restore preservation system on the console in the pilot house. Replace existing generators with supplied Kohler generators, Modify, repair and install fendering system. Modify and repair the monkey heater system. Remove, inspect, preserve and install rudders. Replace thru hull valves and flexible hoses. Replace false bulkheads in the shower room and head. Open, clean and inspect all tanks. Perform sea trials after completion of repairs and full cure time of preservation. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. The Period of Performance is expected to be 25 March 2026 to 29 May 2026. This is a 100% Small Business set-aside under the North American Industry Classification System (NAICS) 336611, size standard 1,300 employees. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. NOTE 1: Please pay particular attention to the inclusion of DFARS 252.232-7998 Obligations in Advance of Fiscal Year 2026 Funding (DEVIATION 2026-O0001). NOTE 2: Please review Request for Quote instructions regarding contract financing.DocumentsNot previously reported21
Dec 3, 2025 · 2 fields changed
DescriptionAMENDMENT 0003 POSTED 11/26. AMENDMENT 0002 POSTED 11/21. AMENDMENT 0001 POSTED 11/19. The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) intends to award a stand-alone Firm-Fixed-Price contract to accomplish the maintenance, repair, and preservation in support of one (1) 65 FT BRAVO DIVE BOAT 65DS1101. Work will be accomplished at the Contractor's facility. Geographical Area of consideration: To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. 65DS1101 Length: 69 FT 10 IN Width: 22 FT 0 IN Draft: 3 FT 6 IN Full Displacement: 55 L TONS Age: 13 YEARS Light Load: 8,000 lbs Hull Type: Aluminum Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer's Representative (COR) to deliver the vessel to the Contractor's facility from Puget Sound Naval Shipyard (PSNS) Bremerton, WA. Remove all fendering and sweep blast clean. Accomplish survey of hull to identify and repair corrosion, preserve the exterior above and below the waterline, including the crane. Apply nonskid to horizontal surfaces on the exterior and interior of the boat. Replace motor mounts. Remove, inspect and install shafting, rudders and propellers. HVAC repair. Maintain and repair watertight hatches and doors. Repair, modify and preserve push knee. Replace and modify corroded deck and bulkhead structure in the main cabin. Install remote fuel shut offs. Identify and repair corrosion beneath the transformers in the aft lazzarette, install a weather shield above the starboard transformer in the aft lazzarette. Replace hydraulic, and fuel hoses. Identify and repair corroded structure beneath the shower room drain. Remove windows, repair window heaters, and reinstall windows. Replace fire suppression system piping and recertify system. Repair damage to the port bow. Accomplish modification and repair of swim platform stairs. Restore preservation system on the console in the pilot house. Replace existing generators with supplied Kohler generators, Modify, repair and install fendering system. Modify and repair the monkey heater system. Remove, inspect, preserve and install rudders. Replace thru hull valves and flexible hoses. Replace false bulkheads in the shower room and head. Open, clean and inspect all tanks. Perform sea trials after completion of repairs and full cure time of preservation. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. The Period of Performance is expected to be 25 March 2026 to 29 May 2026. This is a 100% Small Business set-aside under the North American Industry Classification System (NAICS) 336611, size standard 1,300 employees. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. NOTE 1: Please pay particular attention to the inclusion of DFARS 252.232-7998 Obligations in Advance of Fiscal Year 2026 Funding (DEVIATION 2026-O0001). NOTE 2: Please review Request for Quote instructions regarding contract financing.AMENDMENT 0004 POSTED 12/3. AMENDMENT 0003 POSTED 11/26. AMENDMENT 0002 POSTED 11/21. AMENDMENT 0001 POSTED 11/19. The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) intends to award a stand-alone Firm-Fixed-Price contract to accomplish the maintenance, repair, and preservation in support of one (1) 65 FT BRAVO DIVE BOAT 65DS1101. Work will be accomplished at the Contractor's facility. Geographical Area of consideration: To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. 65DS1101 Length: 69 FT 10 IN Width: 22 FT 0 IN Draft: 3 FT 6 IN Full Displacement: 55 L TONS Age: 13 YEARS Light Load: 8,000 lbs Hull Type: Aluminum Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer's Representative (COR) to deliver the vessel to the Contractor's facility from Puget Sound Naval Shipyard (PSNS) Bremerton, WA. Remove all fendering and sweep blast clean. Accomplish survey of hull to identify and repair corrosion, preserve the exterior above and below the waterline, including the crane. Apply nonskid to horizontal surfaces on the exterior and interior of the boat. Replace motor mounts. Remove, inspect and install shafting, rudders and propellers. HVAC repair. Maintain and repair watertight hatches and doors. Repair, modify and preserve push knee. Replace and modify corroded deck and bulkhead structure in the main cabin. Install remote fuel shut offs. Identify and repair corrosion beneath the transformers in the aft lazzarette, install a weather shield above the starboard transformer in the aft lazzarette. Replace hydraulic, and fuel hoses. Identify and repair corroded structure beneath the shower room drain. Remove windows, repair window heaters, and reinstall windows. Replace fire suppression system piping and recertify system. Repair damage to the port bow. Accomplish modification and repair of swim platform stairs. Restore preservation system on the console in the pilot house. Replace existing generators with supplied Kohler generators, Modify, repair and install fendering system. Modify and repair the monkey heater system. Remove, inspect, preserve and install rudders. Replace thru hull valves and flexible hoses. Replace false bulkheads in the shower room and head. Open, clean and inspect all tanks. Perform sea trials after completion of repairs and full cure time of preservation. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. The Period of Performance is expected to be 25 March 2026 to 29 May 2026. This is a 100% Small Business set-aside under the North American Industry Classification System (NAICS) 336611, size standard 1,300 employees. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. NOTE 1: Please pay particular attention to the inclusion of DFARS 252.232-7998 Obligations in Advance of Fiscal Year 2026 Funding (DEVIATION 2026-O0001). NOTE 2: Please review Request for Quote instructions regarding contract financing.Documents18Removed
DescriptionAMENDMENT 0002 POSTED 11/21. AMENDMENT 0001 POSTED 11/19. The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) intends to award a stand-alone Firm-Fixed-Price contract to accomplish the maintenance, repair, and preservation in support of one (1) 65 FT BRAVO DIVE BOAT 65DS1101. Work will be accomplished at the Contractor's facility. Geographical Area of consideration: To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. 65DS1101 Length: 69 FT 10 IN Width: 22 FT 0 IN Draft: 3 FT 6 IN Full Displacement: 55 L TONS Age: 13 YEARS Light Load: 8,000 lbs Hull Type: Aluminum Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer's Representative (COR) to deliver the vessel to the Contractor's facility from Puget Sound Naval Shipyard (PSNS) Bremerton, WA. Remove all fendering and sweep blast clean. Accomplish survey of hull to identify and repair corrosion, preserve the exterior above and below the waterline, including the crane. Apply nonskid to horizontal surfaces on the exterior and interior of the boat. Replace motor mounts. Remove, inspect and install shafting, rudders and propellers. HVAC repair. Maintain and repair watertight hatches and doors. Repair, modify and preserve push knee. Replace and modify corroded deck and bulkhead structure in the main cabin. Install remote fuel shut offs. Identify and repair corrosion beneath the transformers in the aft lazzarette, install a weather shield above the starboard transformer in the aft lazzarette. Replace hydraulic, and fuel hoses. Identify and repair corroded structure beneath the shower room drain. Remove windows, repair window heaters, and reinstall windows. Replace fire suppression system piping and recertify system. Repair damage to the port bow. Accomplish modification and repair of swim platform stairs. Restore preservation system on the console in the pilot house. Replace existing generators with supplied Kohler generators, Modify, repair and install fendering system. Modify and repair the monkey heater system. Remove, inspect, preserve and install rudders. Replace thru hull valves and flexible hoses. Replace false bulkheads in the shower room and head. Open, clean and inspect all tanks. Perform sea trials after completion of repairs and full cure time of preservation. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. The Period of Performance is expected to be 25 March 2026 to 29 May 2026. This is a 100% Small Business set-aside under the North American Industry Classification System (NAICS) 336611, size standard 1,300 employees. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. NOTE 1: Please pay particular attention to the inclusion of DFARS 252.232-7998 Obligations in Advance of Fiscal Year 2026 Funding (DEVIATION 2026-O0001). NOTE 2: Please review Request for Quote instructions regarding contract financing.AMENDMENT 0003 POSTED 11/26. AMENDMENT 0002 POSTED 11/21. AMENDMENT 0001 POSTED 11/19. The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) intends to award a stand-alone Firm-Fixed-Price contract to accomplish the maintenance, repair, and preservation in support of one (1) 65 FT BRAVO DIVE BOAT 65DS1101. Work will be accomplished at the Contractor's facility. Geographical Area of consideration: To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. 65DS1101 Length: 69 FT 10 IN Width: 22 FT 0 IN Draft: 3 FT 6 IN Full Displacement: 55 L TONS Age: 13 YEARS Light Load: 8,000 lbs Hull Type: Aluminum Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer's Representative (COR) to deliver the vessel to the Contractor's facility from Puget Sound Naval Shipyard (PSNS) Bremerton, WA. Remove all fendering and sweep blast clean. Accomplish survey of hull to identify and repair corrosion, preserve the exterior above and below the waterline, including the crane. Apply nonskid to horizontal surfaces on the exterior and interior of the boat. Replace motor mounts. Remove, inspect and install shafting, rudders and propellers. HVAC repair. Maintain and repair watertight hatches and doors. Repair, modify and preserve push knee. Replace and modify corroded deck and bulkhead structure in the main cabin. Install remote fuel shut offs. Identify and repair corrosion beneath the transformers in the aft lazzarette, install a weather shield above the starboard transformer in the aft lazzarette. Replace hydraulic, and fuel hoses. Identify and repair corroded structure beneath the shower room drain. Remove windows, repair window heaters, and reinstall windows. Replace fire suppression system piping and recertify system. Repair damage to the port bow. Accomplish modification and repair of swim platform stairs. Restore preservation system on the console in the pilot house. Replace existing generators with supplied Kohler generators, Modify, repair and install fendering system. Modify and repair the monkey heater system. Remove, inspect, preserve and install rudders. Replace thru hull valves and flexible hoses. Replace false bulkheads in the shower room and head. Open, clean and inspect all tanks. Perform sea trials after completion of repairs and full cure time of preservation. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. The Period of Performance is expected to be 25 March 2026 to 29 May 2026. This is a 100% Small Business set-aside under the North American Industry Classification System (NAICS) 336611, size standard 1,300 employees. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. NOTE 1: Please pay particular attention to the inclusion of DFARS 252.232-7998 Obligations in Advance of Fiscal Year 2026 Funding (DEVIATION 2026-O0001). NOTE 2: Please review Request for Quote instructions regarding contract financing.Documents16Removed
Nov 21, 2025 · 2 fields changed
DescriptionAMENDMENT 0001 POSTED 11/19. The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) intends to award a stand-alone Firm-Fixed-Price contract to accomplish the maintenance, repair, and preservation in support of one (1) 65 FT BRAVO DIVE BOAT 65DS1101. Work will be accomplished at the Contractor's facility. Geographical Area of consideration: To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. 65DS1101 Length: 69 FT 10 IN Width: 22 FT 0 IN Draft: 3 FT 6 IN Full Displacement: 55 L TONS Age: 13 YEARS Light Load: 8,000 lbs Hull Type: Aluminum Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer's Representative (COR) to deliver the vessel to the Contractor's facility from Puget Sound Naval Shipyard (PSNS) Bremerton, WA. Remove all fendering and sweep blast clean. Accomplish survey of hull to identify and repair corrosion, preserve the exterior above and below the waterline, including the crane. Apply nonskid to horizontal surfaces on the exterior and interior of the boat. Replace motor mounts. Remove, inspect and install shafting, rudders and propellers. HVAC repair. Maintain and repair watertight hatches and doors. Repair, modify and preserve push knee. Replace and modify corroded deck and bulkhead structure in the main cabin. Install remote fuel shut offs. Identify and repair corrosion beneath the transformers in the aft lazzarette, install a weather shield above the starboard transformer in the aft lazzarette. Replace hydraulic, and fuel hoses. Identify and repair corroded structure beneath the shower room drain. Remove windows, repair window heaters, and reinstall windows. Replace fire suppression system piping and recertify system. Repair damage to the port bow. Accomplish modification and repair of swim platform stairs. Restore preservation system on the console in the pilot house. Replace existing generators with supplied Kohler generators, Modify, repair and install fendering system. Modify and repair the monkey heater system. Remove, inspect, preserve and install rudders. Replace thru hull valves and flexible hoses. Replace false bulkheads in the shower room and head. Open, clean and inspect all tanks. Perform sea trials after completion of repairs and full cure time of preservation. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. The Period of Performance is expected to be 25 March 2026 to 29 May 2026. This is a 100% Small Business set-aside under the North American Industry Classification System (NAICS) 336611, size standard 1,300 employees. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. NOTE 1: Please pay particular attention to the inclusion of DFARS 252.232-7998 Obligations in Advance of Fiscal Year 2026 Funding (DEVIATION 2026-O0001). NOTE 2: Please review Request for Quote instructions regarding contract financing.AMENDMENT 0002 POSTED 11/21. AMENDMENT 0001 POSTED 11/19. The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) intends to award a stand-alone Firm-Fixed-Price contract to accomplish the maintenance, repair, and preservation in support of one (1) 65 FT BRAVO DIVE BOAT 65DS1101. Work will be accomplished at the Contractor's facility. Geographical Area of consideration: To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. 65DS1101 Length: 69 FT 10 IN Width: 22 FT 0 IN Draft: 3 FT 6 IN Full Displacement: 55 L TONS Age: 13 YEARS Light Load: 8,000 lbs Hull Type: Aluminum Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer's Representative (COR) to deliver the vessel to the Contractor's facility from Puget Sound Naval Shipyard (PSNS) Bremerton, WA. Remove all fendering and sweep blast clean. Accomplish survey of hull to identify and repair corrosion, preserve the exterior above and below the waterline, including the crane. Apply nonskid to horizontal surfaces on the exterior and interior of the boat. Replace motor mounts. Remove, inspect and install shafting, rudders and propellers. HVAC repair. Maintain and repair watertight hatches and doors. Repair, modify and preserve push knee. Replace and modify corroded deck and bulkhead structure in the main cabin. Install remote fuel shut offs. Identify and repair corrosion beneath the transformers in the aft lazzarette, install a weather shield above the starboard transformer in the aft lazzarette. Replace hydraulic, and fuel hoses. Identify and repair corroded structure beneath the shower room drain. Remove windows, repair window heaters, and reinstall windows. Replace fire suppression system piping and recertify system. Repair damage to the port bow. Accomplish modification and repair of swim platform stairs. Restore preservation system on the console in the pilot house. Replace existing generators with supplied Kohler generators, Modify, repair and install fendering system. Modify and repair the monkey heater system. Remove, inspect, preserve and install rudders. Replace thru hull valves and flexible hoses. Replace false bulkheads in the shower room and head. Open, clean and inspect all tanks. Perform sea trials after completion of repairs and full cure time of preservation. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. The Period of Performance is expected to be 25 March 2026 to 29 May 2026. This is a 100% Small Business set-aside under the North American Industry Classification System (NAICS) 336611, size standard 1,300 employees. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. NOTE 1: Please pay particular attention to the inclusion of DFARS 252.232-7998 Obligations in Advance of Fiscal Year 2026 Funding (DEVIATION 2026-O0001). NOTE 2: Please review Request for Quote instructions regarding contract financing.DocumentsNot previously reported16
Nov 19, 2025 · 1 field changed
DescriptionThe Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) intends to award a stand-alone Firm-Fixed-Price contract to accomplish the maintenance, repair, and preservation in support of one (1) 65 FT BRAVO DIVE BOAT 65DS1101. Work will be accomplished at the Contractor's facility. Geographical Area of consideration: To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. 65DS1101 Length: 69 FT 10 IN Width: 22 FT 0 IN Draft: 3 FT 6 IN Full Displacement: 55 L TONS Age: 13 YEARS Light Load: 8,000 lbs Hull Type: Aluminum Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer's Representative (COR) to deliver the vessel to the Contractor's facility from Puget Sound Naval Shipyard (PSNS) Bremerton, WA. Remove all fendering and sweep blast clean. Accomplish survey of hull to identify and repair corrosion, preserve the exterior above and below the waterline, including the crane. Apply nonskid to horizontal surfaces on the exterior and interior of the boat. Replace motor mounts. Remove, inspect and install shafting, rudders and propellers. HVAC repair. Maintain and repair watertight hatches and doors. Repair, modify and preserve push knee. Replace and modify corroded deck and bulkhead structure in the main cabin. Install remote fuel shut offs. Identify and repair corrosion beneath the transformers in the aft lazzarette, install a weather shield above the starboard transformer in the aft lazzarette. Replace hydraulic, and fuel hoses. Identify and repair corroded structure beneath the shower room drain. Remove windows, repair window heaters, and reinstall windows. Replace fire suppression system piping and recertify system. Repair damage to the port bow. Accomplish modification and repair of swim platform stairs. Restore preservation system on the console in the pilot house. Replace existing generators with supplied Kohler generators, Modify, repair and install fendering system. Modify and repair the monkey heater system. Remove, inspect, preserve and install rudders. Replace thru hull valves and flexible hoses. Replace false bulkheads in the shower room and head. Open, clean and inspect all tanks. Perform sea trials after completion of repairs and full cure time of preservation. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. The Period of Performance is expected to be 25 March 2026 to 29 May 2026. This is a 100% Small Business set-aside under the North American Industry Classification System (NAICS) 336611, size standard 1,300 employees. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. NOTE 1: Please pay particular attention to the inclusion of DFARS 252.232-7998 Obligations in Advance of Fiscal Year 2026 Funding (DEVIATION 2026-O0001). NOTE 2: Please review Request for Quote instructions regarding contract financing.AMENDMENT 0001 POSTED 11/19. The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) intends to award a stand-alone Firm-Fixed-Price contract to accomplish the maintenance, repair, and preservation in support of one (1) 65 FT BRAVO DIVE BOAT 65DS1101. Work will be accomplished at the Contractor's facility. Geographical Area of consideration: To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. 65DS1101 Length: 69 FT 10 IN Width: 22 FT 0 IN Draft: 3 FT 6 IN Full Displacement: 55 L TONS Age: 13 YEARS Light Load: 8,000 lbs Hull Type: Aluminum Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer's Representative (COR) to deliver the vessel to the Contractor's facility from Puget Sound Naval Shipyard (PSNS) Bremerton, WA. Remove all fendering and sweep blast clean. Accomplish survey of hull to identify and repair corrosion, preserve the exterior above and below the waterline, including the crane. Apply nonskid to horizontal surfaces on the exterior and interior of the boat. Replace motor mounts. Remove, inspect and install shafting, rudders and propellers. HVAC repair. Maintain and repair watertight hatches and doors. Repair, modify and preserve push knee. Replace and modify corroded deck and bulkhead structure in the main cabin. Install remote fuel shut offs. Identify and repair corrosion beneath the transformers in the aft lazzarette, install a weather shield above the starboard transformer in the aft lazzarette. Replace hydraulic, and fuel hoses. Identify and repair corroded structure beneath the shower room drain. Remove windows, repair window heaters, and reinstall windows. Replace fire suppression system piping and recertify system. Repair damage to the port bow. Accomplish modification and repair of swim platform stairs. Restore preservation system on the console in the pilot house. Replace existing generators with supplied Kohler generators, Modify, repair and install fendering system. Modify and repair the monkey heater system. Remove, inspect, preserve and install rudders. Replace thru hull valves and flexible hoses. Replace false bulkheads in the shower room and head. Open, clean and inspect all tanks. Perform sea trials after completion of repairs and full cure time of preservation. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. The Period of Performance is expected to be 25 March 2026 to 29 May 2026. This is a 100% Small Business set-aside under the North American Industry Classification System (NAICS) 336611, size standard 1,300 employees. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. NOTE 1: Please pay particular attention to the inclusion of DFARS 252.232-7998 Obligations in Advance of Fiscal Year 2026 Funding (DEVIATION 2026-O0001). NOTE 2: Please review Request for Quote instructions regarding contract financing.
Notice history
Solicitation · LatestPosted Dec 15, 2025 · response deadline Dec 16, 2026, 10:00 PM UTC
SolicitationPosted Dec 5, 2025 · response deadline Dec 16, 2026, 10:00 PM UTC
SolicitationPosted Dec 4, 2025 · response deadline Dec 9, 2026, 10:00 PM UTC
SolicitationPosted Dec 3, 2025 · response deadline Dec 9, 2026, 10:00 PM UTC
SolicitationPosted Nov 26, 2025 · response deadline Dec 9, 2026, 10:00 PM UTC
SolicitationPosted Nov 26, 2025 · response deadline Dec 4, 2026, 10:00 PM UTC
SolicitationPosted Nov 21, 2025 · response deadline Dec 4, 2026, 10:00 PM UTC
SolicitationPosted Nov 19, 2025 · response deadline Dec 4, 2026, 10:00 PM UTC
SolicitationPosted Nov 5, 2025 · response deadline Dec 4, 2026, 10:00 PM UTC
Attachments
Open a filename to view the saved source file. If a saved copy is not available yet, FedRoster will continue to the matching SAM.gov notice.