Place of performanceCannelton Locks and Dam5281 E. State Road 66Cannelton, IN 47520, Cannelton, IN, 47520, United States
Opportunity summary
Source-cited
The Department of Defense seeks proposals for fabrication and refurbishment services, specifically involving the removal, fabrication, and installation of culvert valve assemblies at Cannelton Lock and Dam in Indiana. The basis for award is the lowest evaluated price, and proposals must be submitted electronically via PIEE. [1][2][3][4]
Key points
Work includes removal, fabrication, and installation of two culvert valve assemblies. [1]
The opportunity is a Small Business Set Aside - Total. [4]
Watch items
Proposals are due on September 14, 2026, at 11:00 AM EDT. [4]
W912QR-61396929_Specs-0000.pdf5.7 Travel Per Base MATOC Statement of Work, Subsection 2 - Technical Requirements, C-2.8 the Government will pay travel as allowable per FAR 31.205-46 and more specifically per FAR 31.205-46(a)(2)(i) (Federal Travel Regulations, prescribed by the General Services Administration, for travel in the contiguous United States) for the Contractor's employees where travel is required by the delivery order.
W912QR-61396929_Specs-0000.pdfThe contractor shall also provide all information required for background checks to meet installation/facility access requirements to be accomplished by installation Provost Marshall Office, Director of Emergency Services or Security Office.
W912QR-61396929_Specs-0000.pdfCertificates Of Insurance Surety Bonds List Of Proposed Subcontractors List Of Proposed Products Submittal Register Schedule Of Prices Or Earned Value Report Accident Prevention Plan Work Plan Quality Control (QC) plan SD-02 Shop Drawings Drawings, diagrams and schedules specifically prepared to illustrate some portion of the work.
Generated from the public notice and source-backed solicitation passages. Confirm important requirements in the cited brief and official documents.
Public-source intelligence
Source-backed opportunity brief
8 citations · 6 sources
5.7 Travel Per Base MATOC Statement of Work, Subsection 2 - Technical Requirements, C-2.8 the Government will pay travel as allowable per FAR 31.205-46 and more specifically per FAR 31.205-46(a)(2)(i) (Federal Travel Regulations, prescribed by the General Services Administration, for travel in the contiguous United States) for the Contractor's employees where travel is required by the delivery order.
The contractor shall also provide all information required for background checks to meet installation/facility access requirements to be accomplished by installation Provost Marshall Office, Director of Emergency Services or Security Office.
Certificates Of Insurance Surety Bonds List Of Proposed Subcontractors List Of Proposed Products Submittal Register Schedule Of Prices Or Earned Value Report Accident Prevention Plan Work Plan Quality Control (QC) plan SD-02 Shop Drawings Drawings, diagrams and schedules specifically prepared to illustrate some portion of the work.
ELECTRONIC PROPOSAL SUBMISSION Offerors shall submit one (1) electronic copy of their offer via the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module before the time and date specified in Block 13 of this SF 1442.
Extracted from the official notice and archived solicitation files. Confirm controlling requirements in the source documents.
Notice information
Read full notice text
Dear MATOC Contractors:Reference is made to your Indefinite Delivery Indefinite Quantity Contracts, NumbersW911WN23D0001 through W911WN23D0007, to provide varying types of Fabrication of parts and Refurbishment Services for the U.S. Army Corps of Engineers, Great Lakes and Ohio RiverMission Boundaries primarily for Civil projects.We request you submit a price proposal for work to be completed in the base bid that includes, but is not limited to, removal of two (2) culvert valve assemblies, fabrication and delivery of two(2) culvert valve assemblies, and installation of two (2) culvert valve assemblies located on theriver wall of the main lock chamber (1200 ft chamber) at Cannelton Lock and Dam, Cannelton, Indiana. A culvert valve assembly includes a strut arm, bell crank, culvert valve, pins, valvebearing block assemblies, and other ancillary items as shown on the plans. Items to be removedare highlighted in the plan set. Removal may include the disposal of the culvert valves. See spec02 41 00 DEMOLITION AND DECONSTRUCTION for additional details. Work includesunwatering of the culvert valve chamber, maintaining the unwatered state throughout theduration of the culvert valve installation, and rewatering of the culvert valve chamber.Disclosure of magnitude of construction projects is between $5,000,000.00 and $10,000,000.00.The basis for award of this task order is lowest evaluated price.Offerors shall allow for Government acceptance of proposals for 60 calendar days from the dateproposals are due. Any proposal that does not allow acceptance for 60 days will not beconsidered and will be rejected.Site Visit ??????????????????????????? Please see the Clauses Section, for date and time.No inquiries will be allowed during the site visit. All inquiries must be submitted via the ProjNetBidder Inquiry site. A Bidder Key is provided with the solicitation information. Please RSVP thefollowing information:The documents are available for download at www.SAM.gov only. All vendors must beregistered in the SAM database at www.SAM.gov. The Request For Proposal (RFP) can befound by logging into the website as a vendor and searching for the solicitation number(W912QR-61396929).Proposals are due no later than 11:00 AM EDT on Monday 07 September 2026. Pleaseacknowledge receipt of this RFP by signing below in the space provided.Proposals must be submitted using the Procurement Integrated Enterprise Environment (PIEE)Solicitation Module. *See ELECTRONIC PROPOSAL SUBMISSION for instructions.Proposals not received by the stated date/time will not be considered.All questions regarding this Request for Proposal (RFP) must be submitted via ProjNet. Thewebsite to access this system is www.projnet.org and the bidder inquiry key for this specificproject is: (58UVT3-X47B9H). Please see ProjNet instructions included in this RFP. 8/21/2026 - Amendment 0001 Issueed, RFP due date revised from 9/7/2026 to 9/14/2026.
What changed
Aug 27, 2026 · 3 fields changed
Archive date2027-08-212026-09-29DescriptionDear MATOC Contractors:Reference is made to your Indefinite Delivery Indefinite Quantity Contracts, NumbersW911WN23D0001 through W911WN23D0007, to provide varying types of Fabrication of parts and Refurbishment Services for the U.S. Army Corps of Engineers, Great Lakes and Ohio RiverMission Boundaries primarily for Civil projects.We request you submit a price proposal for work to be completed in the base bid that includes, but is not limited to, removal of two (2) culvert valve assemblies, fabrication and delivery of two(2) culvert valve assemblies, and installation of two (2) culvert valve assemblies located on theriver wall of the main lock chamber (1200 ft chamber) at Cannelton Lock and Dam, Cannelton, Indiana. A culvert valve assembly includes a strut arm, bell crank, culvert valve, pins, valvebearing block assemblies, and other ancillary items as shown on the plans. Items to be removedare highlighted in the plan set. Removal may include the disposal of the culvert valves. See spec02 41 00 DEMOLITION AND DECONSTRUCTION for additional details. Work includesunwatering of the culvert valve chamber, maintaining the unwatered state throughout theduration of the culvert valve installation, and rewatering of the culvert valve chamber.Disclosure of magnitude of construction projects is between $5,000,000.00 and $10,000,000.00.The basis for award of this task order is lowest evaluated price.Offerors shall allow for Government acceptance of proposals for 60 calendar days from the dateproposals are due. Any proposal that does not allow acceptance for 60 days will not beconsidered and will be rejected.Site Visit ??????????????????????????? Please see the Clauses Section, for date and time.No inquiries will be allowed during the site visit. All inquiries must be submitted via the ProjNetBidder Inquiry site. A Bidder Key is provided with the solicitation information. Please RSVP thefollowing information:The documents are available for download at www.SAM.gov only. All vendors must beregistered in the SAM database at www.SAM.gov. The Request For Proposal (RFP) can befound by logging into the website as a vendor and searching for the solicitation number(W912QR-61396929).Proposals are due no later than 11:00 AM EDT on Monday 07 September 2026. Pleaseacknowledge receipt of this RFP by signing below in the space provided.Proposals must be submitted using the Procurement Integrated Enterprise Environment (PIEE)Solicitation Module. *See ELECTRONIC PROPOSAL SUBMISSION for instructions.Proposals not received by the stated date/time will not be considered.All questions regarding this Request for Proposal (RFP) must be submitted via ProjNet. Thewebsite to access this system is www.projnet.org and the bidder inquiry key for this specificproject is: (58UVT3-X47B9H). Please see ProjNet instructions included in this RFP.Dear MATOC Contractors:Reference is made to your Indefinite Delivery Indefinite Quantity Contracts, NumbersW911WN23D0001 through W911WN23D0007, to provide varying types of Fabrication of parts and Refurbishment Services for the U.S. Army Corps of Engineers, Great Lakes and Ohio RiverMission Boundaries primarily for Civil projects.We request you submit a price proposal for work to be completed in the base bid that includes, but is not limited to, removal of two (2) culvert valve assemblies, fabrication and delivery of two(2) culvert valve assemblies, and installation of two (2) culvert valve assemblies located on theriver wall of the main lock chamber (1200 ft chamber) at Cannelton Lock and Dam, Cannelton, Indiana. A culvert valve assembly includes a strut arm, bell crank, culvert valve, pins, valvebearing block assemblies, and other ancillary items as shown on the plans. Items to be removedare highlighted in the plan set. Removal may include the disposal of the culvert valves. See spec02 41 00 DEMOLITION AND DECONSTRUCTION for additional details. Work includesunwatering of the culvert valve chamber, maintaining the unwatered state throughout theduration of the culvert valve installation, and rewatering of the culvert valve chamber.Disclosure of magnitude of construction projects is between $5,000,000.00 and $10,000,000.00.The basis for award of this task order is lowest evaluated price.Offerors shall allow for Government acceptance of proposals for 60 calendar days from the dateproposals are due. Any proposal that does not allow acceptance for 60 days will not beconsidered and will be rejected.Site Visit ??????????????????????????? Please see the Clauses Section, for date and time.No inquiries will be allowed during the site visit. All inquiries must be submitted via the ProjNetBidder Inquiry site. A Bidder Key is provided with the solicitation information. Please RSVP thefollowing information:The documents are available for download at www.SAM.gov only. All vendors must beregistered in the SAM database at www.SAM.gov. The Request For Proposal (RFP) can befound by logging into the website as a vendor and searching for the solicitation number(W912QR-61396929).Proposals are due no later than 11:00 AM EDT on Monday 07 September 2026. Pleaseacknowledge receipt of this RFP by signing below in the space provided.Proposals must be submitted using the Procurement Integrated Enterprise Environment (PIEE)Solicitation Module. *See ELECTRONIC PROPOSAL SUBMISSION for instructions.Proposals not received by the stated date/time will not be considered.All questions regarding this Request for Proposal (RFP) must be submitted via ProjNet. Thewebsite to access this system is www.projnet.org and the bidder inquiry key for this specificproject is: (58UVT3-X47B9H). Please see ProjNet instructions included in this RFP. 8/21/2026 - Amendment 0001 Issueed, RFP due date revised from 9/7/2026 to 9/14/2026.DocumentsNot previously reported5
Aug 21, 2026 · 3 fields changed
Archive date2026-09-292027-08-21DescriptionDear MATOC Contractors:Reference is made to your Indefinite Delivery Indefinite Quantity Contracts, NumbersW911WN23D0001 through W911WN23D0007, to provide varying types of Fabrication of parts and Refurbishment Services for the U.S. Army Corps of Engineers, Great Lakes and Ohio RiverMission Boundaries primarily for Civil projects.We request you submit a price proposal for work to be completed in the base bid that includes, but is not limited to, removal of two (2) culvert valve assemblies, fabrication and delivery of two(2) culvert valve assemblies, and installation of two (2) culvert valve assemblies located on theriver wall of the main lock chamber (1200 ft chamber) at Cannelton Lock and Dam, Cannelton, Indiana. A culvert valve assembly includes a strut arm, bell crank, culvert valve, pins, valvebearing block assemblies, and other ancillary items as shown on the plans. Items to be removedare highlighted in the plan set. Removal may include the disposal of the culvert valves. See spec02 41 00 DEMOLITION AND DECONSTRUCTION for additional details. Work includesunwatering of the culvert valve chamber, maintaining the unwatered state throughout theduration of the culvert valve installation, and rewatering of the culvert valve chamber.Disclosure of magnitude of construction projects is between $5,000,000.00 and $10,000,000.00.The basis for award of this task order is lowest evaluated price.Offerors shall allow for Government acceptance of proposals for 60 calendar days from the dateproposals are due. Any proposal that does not allow acceptance for 60 days will not beconsidered and will be rejected.Site Visit ??????????????????????????? Please see the Clauses Section, for date and time.No inquiries will be allowed during the site visit. All inquiries must be submitted via the ProjNetBidder Inquiry site. A Bidder Key is provided with the solicitation information. Please RSVP thefollowing information:The documents are available for download at www.SAM.gov only. All vendors must beregistered in the SAM database at www.SAM.gov. The Request For Proposal (RFP) can befound by logging into the website as a vendor and searching for the solicitation number(W912QR-61396929).Proposals are due no later than 11:00 AM EDT on Monday 07 September 2026. Pleaseacknowledge receipt of this RFP by signing below in the space provided.Proposals must be submitted using the Procurement Integrated Enterprise Environment (PIEE)Solicitation Module. *See ELECTRONIC PROPOSAL SUBMISSION for instructions.Proposals not received by the stated date/time will not be considered.All questions regarding this Request for Proposal (RFP) must be submitted via ProjNet. Thewebsite to access this system is www.projnet.org and the bidder inquiry key for this specificproject is: (58UVT3-X47B9H). Please see ProjNet instructions included in this RFP. 8/21/2026 - Amendment 0001 Issueed, RFP due date revised from 9/7/2026 to 9/14/2026.Dear MATOC Contractors:Reference is made to your Indefinite Delivery Indefinite Quantity Contracts, NumbersW911WN23D0001 through W911WN23D0007, to provide varying types of Fabrication of parts and Refurbishment Services for the U.S. Army Corps of Engineers, Great Lakes and Ohio RiverMission Boundaries primarily for Civil projects.We request you submit a price proposal for work to be completed in the base bid that includes, but is not limited to, removal of two (2) culvert valve assemblies, fabrication and delivery of two(2) culvert valve assemblies, and installation of two (2) culvert valve assemblies located on theriver wall of the main lock chamber (1200 ft chamber) at Cannelton Lock and Dam, Cannelton, Indiana. A culvert valve assembly includes a strut arm, bell crank, culvert valve, pins, valvebearing block assemblies, and other ancillary items as shown on the plans. Items to be removedare highlighted in the plan set. Removal may include the disposal of the culvert valves. See spec02 41 00 DEMOLITION AND DECONSTRUCTION for additional details. Work includesunwatering of the culvert valve chamber, maintaining the unwatered state throughout theduration of the culvert valve installation, and rewatering of the culvert valve chamber.Disclosure of magnitude of construction projects is between $5,000,000.00 and $10,000,000.00.The basis for award of this task order is lowest evaluated price.Offerors shall allow for Government acceptance of proposals for 60 calendar days from the dateproposals are due. Any proposal that does not allow acceptance for 60 days will not beconsidered and will be rejected.Site Visit ??????????????????????????? Please see the Clauses Section, for date and time.No inquiries will be allowed during the site visit. All inquiries must be submitted via the ProjNetBidder Inquiry site. A Bidder Key is provided with the solicitation information. Please RSVP thefollowing information:The documents are available for download at www.SAM.gov only. All vendors must beregistered in the SAM database at www.SAM.gov. The Request For Proposal (RFP) can befound by logging into the website as a vendor and searching for the solicitation number(W912QR-61396929).Proposals are due no later than 11:00 AM EDT on Monday 07 September 2026. Pleaseacknowledge receipt of this RFP by signing below in the space provided.Proposals must be submitted using the Procurement Integrated Enterprise Environment (PIEE)Solicitation Module. *See ELECTRONIC PROPOSAL SUBMISSION for instructions.Proposals not received by the stated date/time will not be considered.All questions regarding this Request for Proposal (RFP) must be submitted via ProjNet. Thewebsite to access this system is www.projnet.org and the bidder inquiry key for this specificproject is: (58UVT3-X47B9H). Please see ProjNet instructions included in this RFP.Documents4Removed
Aug 21, 2026 · 4 fields changed
Response deadline2026-09-07T15:00:00+00:002026-09-14T15:00:00+00:00Archive date2027-08-052026-09-29DescriptionDear MATOC Contractors:Reference is made to your Indefinite Delivery Indefinite Quantity Contracts, NumbersW911WN23D0001 through W911WN23D0007, to provide varying types of Fabrication of parts and Refurbishment Services for the U.S. Army Corps of Engineers, Great Lakes and Ohio RiverMission Boundaries primarily for Civil projects.We request you submit a price proposal for work to be completed in the base bid that includes, but is not limited to, removal of two (2) culvert valve assemblies, fabrication and delivery of two(2) culvert valve assemblies, and installation of two (2) culvert valve assemblies located on theriver wall of the main lock chamber (1200 ft chamber) at Cannelton Lock and Dam, Cannelton, Indiana. A culvert valve assembly includes a strut arm, bell crank, culvert valve, pins, valvebearing block assemblies, and other ancillary items as shown on the plans. Items to be removedare highlighted in the plan set. Removal may include the disposal of the culvert valves. See spec02 41 00 DEMOLITION AND DECONSTRUCTION for additional details. Work includesunwatering of the culvert valve chamber, maintaining the unwatered state throughout theduration of the culvert valve installation, and rewatering of the culvert valve chamber.Disclosure of magnitude of construction projects is between $5,000,000.00 and $10,000,000.00.The basis for award of this task order is lowest evaluated price.Offerors shall allow for Government acceptance of proposals for 60 calendar days from the dateproposals are due. Any proposal that does not allow acceptance for 60 days will not beconsidered and will be rejected.Site Visit ? Please see the Clauses Section, for date and time.No inquiries will be allowed during the site visit. All inquiries must be submitted via the ProjNetBidder Inquiry site. A Bidder Key is provided with the solicitation information. Please RSVP thefollowing information:The documents are available for download at www.SAM.gov only. All vendors must beregistered in the SAM database at www.SAM.gov. The Request For Proposal (RFP) can befound by logging into the website as a vendor and searching for the solicitation number(W912QR-61396929).Proposals are due no later than 11:00 AM EDT on Monday 07 September 2026. Pleaseacknowledge receipt of this RFP by signing below in the space provided.Proposals must be submitted using the Procurement Integrated Enterprise Environment (PIEE)Solicitation Module. *See ELECTRONIC PROPOSAL SUBMISSION for instructions.Proposals not received by the stated date/time will not be considered.All questions regarding this Request for Proposal (RFP) must be submitted via ProjNet. Thewebsite to access this system is www.projnet.org and the bidder inquiry key for this specificproject is: (58UVT3-X47B9H). Please see ProjNet instructions included in this RFP.Dear MATOC Contractors:Reference is made to your Indefinite Delivery Indefinite Quantity Contracts, NumbersW911WN23D0001 through W911WN23D0007, to provide varying types of Fabrication of parts and Refurbishment Services for the U.S. Army Corps of Engineers, Great Lakes and Ohio RiverMission Boundaries primarily for Civil projects.We request you submit a price proposal for work to be completed in the base bid that includes, but is not limited to, removal of two (2) culvert valve assemblies, fabrication and delivery of two(2) culvert valve assemblies, and installation of two (2) culvert valve assemblies located on theriver wall of the main lock chamber (1200 ft chamber) at Cannelton Lock and Dam, Cannelton, Indiana. A culvert valve assembly includes a strut arm, bell crank, culvert valve, pins, valvebearing block assemblies, and other ancillary items as shown on the plans. Items to be removedare highlighted in the plan set. Removal may include the disposal of the culvert valves. See spec02 41 00 DEMOLITION AND DECONSTRUCTION for additional details. Work includesunwatering of the culvert valve chamber, maintaining the unwatered state throughout theduration of the culvert valve installation, and rewatering of the culvert valve chamber.Disclosure of magnitude of construction projects is between $5,000,000.00 and $10,000,000.00.The basis for award of this task order is lowest evaluated price.Offerors shall allow for Government acceptance of proposals for 60 calendar days from the dateproposals are due. Any proposal that does not allow acceptance for 60 days will not beconsidered and will be rejected.Site Visit ??????????????????????????? Please see the Clauses Section, for date and time.No inquiries will be allowed during the site visit. All inquiries must be submitted via the ProjNetBidder Inquiry site. A Bidder Key is provided with the solicitation information. Please RSVP thefollowing information:The documents are available for download at www.SAM.gov only. All vendors must beregistered in the SAM database at www.SAM.gov. The Request For Proposal (RFP) can befound by logging into the website as a vendor and searching for the solicitation number(W912QR-61396929).Proposals are due no later than 11:00 AM EDT on Monday 07 September 2026. Pleaseacknowledge receipt of this RFP by signing below in the space provided.Proposals must be submitted using the Procurement Integrated Enterprise Environment (PIEE)Solicitation Module. *See ELECTRONIC PROPOSAL SUBMISSION for instructions.Proposals not received by the stated date/time will not be considered.All questions regarding this Request for Proposal (RFP) must be submitted via ProjNet. Thewebsite to access this system is www.projnet.org and the bidder inquiry key for this specificproject is: (58UVT3-X47B9H). Please see ProjNet instructions included in this RFP. 8/21/2026 - Amendment 0001 Issueed, RFP due date revised from 9/7/2026 to 9/14/2026.DocumentsNot previously reported4
Aug 5, 2026 · 3 fields changed
Archive date2026-09-222027-08-05DescriptionMATOC Pool : W911WN23D0001 through W911WN23D0007 Dear MATOC Contractors:Reference is made to your Indefinite Delivery Indefinite Quantity Contracts, Numbers W911WN23D0001 through W911WN23D0007, to provide varying types of Fabrication of parts and Refurbishment Services for the U.S. Army Corps of Engineers, Great Lakes and Ohio River Mission Boundaries primarily for Civil projects. We request you submit a price proposal for work to be completed in the base bid that includes, but is not limited to, removal of two (2) culvert valve assemblies, fabrication and delivery of two(2) culvert valve assemblies, and installation of two (2) culvert valve assemblies located on theriver wall of the main lock chamber (1200 ft chamber) at Cannelton Lock and Dam, Cannelton, Indiana. A culvert valve assembly includes a strut arm, bell crank, culvert valve, pins, valvebearing block assemblies, and other ancillary items as shown on the plans. Items to be removedare highlighted in the plan set. Removal may include the disposal of the culvert valves. See spec02 41 00 DEMOLITION AND DECONSTRUCTION for additional details. Work includesunwatering of the culvert valve chamber, maintaining the unwatered state throughout theduration of the culvert valve installation, and rewatering of the culvert valve chamber. Disclosure of magnitude of construction projects is between $5,000,000.00 and $10,000,000.00. The basis for award of this task order is lowest evaluated price.Offerors shall allow for Government acceptance of proposals for 60 calendar days from the dateproposals are due. Any proposal that does not allow acceptance for 60 days will not beconsidered and will be rejected. Site Visit - Please see the Clauses Section, for date and time.No inquiries will be allowed during the site visit. All inquiries must be submitted via the ProjNetBidder Inquiry site. A Bidder Key is provided with the solicitation information. Please RSVP thefollowing information: The documents are available for download at www.SAM.gov only. All vendors must beregistered in the SAM database at www.SAM.gov. The Request For Proposal (RFP) can befound by logging into the website as a vendor and searching for the solicitation number(W912QR-61396929). Proposals are due no later than 11:00 AM EDT on Monday 07 September 2026. Pleaseacknowledge receipt of this RFP by signing below in the space provided. Proposals must be submitted using the Procurement Integrated Enterprise Environment (PIEE)Solicitation Module. *See ELECTRONIC PROPOSAL SUBMISSION for instructions.Proposals not received by the stated date/time will not be considered.All questions regarding this Request for Proposal (RFP) must be submitted via ProjNet. Thewebsite to access this system is www.projnet.org and the bidder inquiry key for this specificproject is: (58UVT3-X47B9H). Please see ProjNet instructions included in this RFP.Dear MATOC Contractors:Reference is made to your Indefinite Delivery Indefinite Quantity Contracts, NumbersW911WN23D0001 through W911WN23D0007, to provide varying types of Fabrication of parts and Refurbishment Services for the U.S. Army Corps of Engineers, Great Lakes and Ohio RiverMission Boundaries primarily for Civil projects.We request you submit a price proposal for work to be completed in the base bid that includes, but is not limited to, removal of two (2) culvert valve assemblies, fabrication and delivery of two(2) culvert valve assemblies, and installation of two (2) culvert valve assemblies located on theriver wall of the main lock chamber (1200 ft chamber) at Cannelton Lock and Dam, Cannelton, Indiana. A culvert valve assembly includes a strut arm, bell crank, culvert valve, pins, valvebearing block assemblies, and other ancillary items as shown on the plans. Items to be removedare highlighted in the plan set. Removal may include the disposal of the culvert valves. See spec02 41 00 DEMOLITION AND DECONSTRUCTION for additional details. Work includesunwatering of the culvert valve chamber, maintaining the unwatered state throughout theduration of the culvert valve installation, and rewatering of the culvert valve chamber.Disclosure of magnitude of construction projects is between $5,000,000.00 and $10,000,000.00.The basis for award of this task order is lowest evaluated price.Offerors shall allow for Government acceptance of proposals for 60 calendar days from the dateproposals are due. Any proposal that does not allow acceptance for 60 days will not beconsidered and will be rejected.Site Visit ? Please see the Clauses Section, for date and time.No inquiries will be allowed during the site visit. All inquiries must be submitted via the ProjNetBidder Inquiry site. A Bidder Key is provided with the solicitation information. Please RSVP thefollowing information:The documents are available for download at www.SAM.gov only. All vendors must beregistered in the SAM database at www.SAM.gov. The Request For Proposal (RFP) can befound by logging into the website as a vendor and searching for the solicitation number(W912QR-61396929).Proposals are due no later than 11:00 AM EDT on Monday 07 September 2026. Pleaseacknowledge receipt of this RFP by signing below in the space provided.Proposals must be submitted using the Procurement Integrated Enterprise Environment (PIEE)Solicitation Module. *See ELECTRONIC PROPOSAL SUBMISSION for instructions.Proposals not received by the stated date/time will not be considered.All questions regarding this Request for Proposal (RFP) must be submitted via ProjNet. Thewebsite to access this system is www.projnet.org and the bidder inquiry key for this specificproject is: (58UVT3-X47B9H). Please see ProjNet instructions included in this RFP.Documents3Removed
Notice history
Solicitation · LatestPosted Aug 27, 2026 · response deadline Sep 14, 2026, 3:00 PM UTC
SolicitationPosted Aug 21, 2026 · response deadline Sep 14, 2026, 3:00 PM UTC
SolicitationPosted Aug 21, 2026 · response deadline Sep 14, 2026, 3:00 PM UTC
SolicitationPosted Aug 5, 2026 · response deadline Sep 7, 2026, 3:00 PM UTC
SolicitationPosted Aug 5, 2026 · response deadline Sep 7, 2026, 3:00 PM UTC
Attachments
Open a filename to view the saved source file. If a saved copy is not available yet, FedRoster will continue to the matching SAM.gov notice.